logo

Detalhes dos produtos

Created with Pixso. Casa Created with Pixso. produtos Created with Pixso.
Acessório de ensaio do medidor
Created with Pixso.

SW-5D Time-Base Frequency Instrument with 7 Selectable Standard Outputs 1.3" OLED Display and OCXO Temperature Deviation ≤ 0.05 ppm

SW-5D Time-Base Frequency Instrument with 7 Selectable Standard Outputs 1.3" OLED Display and OCXO Temperature Deviation ≤ 0.05 ppm

Nome da marca: GENY
Número do modelo: SW-5D
MOQ: 1
preço: negotiate rates
Condições de pagamento: T/t, l/c, d/p, t/t
Capacidade de abastecimento: 10 peças/ 1 mês
Informações detalhadas
Lugar de origem:
CHINA
Certificação:
ISO, CE
Temperatura de referência de teste:
25℃
Iniciação quente:
27s
Iniciação a quente:
1s
Sensibilidade ao início do frio:
-148dBm
Frequência de pulso de relógio de oscilador de cristal padrão:
625kHz/s
Precisão de frequência de pulso do oscilador de cristal::
≤4 × 10-7
Detalhes da embalagem:
Casos de compensado
Habilidade da fonte:
10 peças/ 1 mês
Destacar:

7 selectable standard outputs Time-Base Frequency Instrument

,

1.3" OLED display Frequency Standard Instrument

,

OCXO temperature deviation ≤ 0.05 ppm Clock Verification Instrument

Descrição do produto
SW-5D Time-Base Frequency Instrument
Precision instrument designed for electricity meter clock verification with high-stability time base and GPS synchronization.
Key Features
  • High-stability OCXO time base; frequency accuracy ≤ 4*10-7
  • GPS time sync and correction via Ethernet (second-level synchronization)
  • 7 selectable standard outputs: 0.5 Hz / 1 Hz / 100 kHz / 500 kHz / 625 kHz / 1 MHz / 2 MHz
  • Pulse input measurement: 0.1 Hz-1 MHz, with automatic daily time error calculation
  • 1.3" OLED display, simple keypad, remembers last output frequency
Technical Specifications
Time Base OCXO; temperature deviation ≤ 0.05 ppm at -20℃ to +60℃ (ref 25℃)
Default Output 625 kHz; 50% duty cycle; levels: High 4.5 V / Low 0.11 V (typ.)
GPS Performance Cold start ~29 s, hot start ~1 s; sensitivity: capture -148 dBm / tracking -165 dBm
Error Test Duration 1-100 s (default 60 s); displays measured input frequency and daily time error
I/O F-IN (frequency measurement), F-OUT (standard frequency output)
Communications RJ45 Ethernet (default IP 192.168.1.199, port 1234), RS-232 (reserved)
Power AC 220 V (fused), chassis ground terminal
Applications
  • Accuracy verification of internal clocks in multifunction energy meters
  • Laboratory and field time-base standard output and pulse frequency measurement
  • GPS-based time synchronization for calibration systems
Installation Guide
  • Connect F-OUT to system comm board J2 (adapter cable included)
  • Connect S-ANT to outdoor antenna for GPS time sync
  • Use Ethernet for IP/port configuration and standard time read/write
Ordering Information
  • Model: SW-5D Time-Base Frequency Instrument
  • Standard accessories: output adapter cable, AC power cord, user manual
  • Options: GPS antenna and extension cable, RS-232 cable